The wheel frame has two positions. When you need to move the TILLER, pull the lock pin out to unlock, then rotate the wheel shaft, Lower the wheel frame so that it touches the ground, when you need to use the CULTIVATOR to work, pull the lock pin out to unlock, rotate the wheel shaft to lift the wheel frame. At this point, the spur can be inserted into the soil to help you better control the forward force of the appliance and reduce fatigue. Power supply voltage: 120V60Hz 120V60Hz 120V60Hz. Move the appliance to the work area prior to starting the motor.
Hold the tiller firmly, adjust the spur into the ground and raise the appliance and switch on the motor at no load. For breaking sod or deep tilling, allow the tines to pull the tiller forward to the end of your arm's reach, then firmly pull the tiller back towards you. By repeatedly allowing the tiller to move forward and then pulling back to you, the tiller will be most effective.